We are bearing manufacrturer and supplier in China,which offer 16000 and 6700 series bearings.

Thin Section Deep Groove Ball Bearings

Thin Section Deep Groove Ball Bearings were developed for applications where space limitations are of the utmost importance. For example, with the development of humanization design, more and more application for people need smaller and lighter, the difference between the inside and outside diameters of the rings has been minimized or thinned out. Of course this comes at a price by compromising load capacities compared with standard deep groove ball bearing. However, these bearings still accommodate a relatively light radial thrust or combined loads to reach the requirement of application conveniently.

The know-how and the advanced machines used in manufacturing allow our Bearings to reach thin dimensional limits. Our Thin section bearings facilitate the compact design of industrial robots, electrical tools, motor, electrical home appliance, automotive industry, audio-visual and office automation equipment.

16000 and 6700 series bearings : Metric dimensional series for very limited space applications and quite light loads

16000 and 6700 series bearings Supplier

Any combination of closures is available

Basic Bearing No.	Nominal Bearing Dimensions						Preferred Shoulder Diameters
	d		D		B,C		r (min)		da (min)		da (max)		Da (max)
	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch
16001	12	0.4724	28	1.1024	7	0.2775	0.3	0.0118	14.0	0.551	…	…	26.0	1.024
16002	15	0.5906	32	1.2598	8	0.3150	0.3	0.0118	17.0	0.669	…	…	30.0	1.181
16003	17	0.6693	35	1.3780	8	0.3150	0.3	0.0118	19.0	0.748	…	…	33.0	1.299
16004	20	0.7874	42	1.6535	8	0.3150	0.3	0.0118	22.0	0.866	…	…	40.0	1.575
16005	25	0.9843	47	1.8504	8	0.3150	0.3	0.0118	27.0	1.063	…	…	45.0	1.772
16006	30	1.1811	55	2.1650	9	0.3543	0.3	0.0118	32.0	1.260	…	…	53.0	2.087
16007	35	1.3779	62	2.4409	9	0.3543	0.3	0.0118	37.0	1.457	…	…	60.0	2.362
16008	40	1.5748	68	2.6772	9	0.3543	0.3	0.0118	42.0	1.654	…	…	66.0	2.598
16009	45	1.7717	75	2.9528	10	0.3937	0.6	0.0236	48.2	1.898	…	…	71.8	2.827
16010	50	1.9650	80	3.1496	10	0.3937	0.6	0.0236	53.2	2.094	…	…	76.8	3.024
16011	55	2.1653	90	3.5433	11	0.4330	0.6	0.0236	58.2	2.291	…	…	86.8	3.417
16012	60	2.3620	95	3.7400	11	0.4330	0.6	0.0236	63.2	2.488	…	…	91.8	3.614

Any combination of closures is available

Basic Bearing No.	Nominal Bearing Dimensions						Preferred Shoulder Diameters
	d		D		B,C		r (min)		da (min)		da (max)		Da (max)
	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch
6700	10	0.3937	16	0.5906	3	0.1181	0.3	0.0118	10.8	0.425	…	…	14.2	0.559
6701	12	0.4724	18	0.7087	4	0.1575	0.3	0.0118	13.6	0.535	13.8	0.543	16.4	0.646
6702	15	0.5906	21	0.8268	4	0.1575	0.3	0.0118	16.6	0.654	16.8	0.661	19.4	0.764
6703	17	0.6693	23	0.9055	4	0.1575	0.3	0.0118	18.6	0.732	18.8	0.740	21.4	0.843

☆We reserve the right to change specifications and other information included in this catalogue without notice.

Other Parameters

Basic Bearing No.	Basic Load Ratings (lbs)		Factor	Limiting Speeds (1000 RPM)		Ball Complement		Bearing Weight (Approx.)
	Cr  KN	Cor KN	fo	Grease rpm	Oil rpm	No.	Size mm	Weight
								Ibs	kg
16001	5.100	2.400	13.2	26000	30000	8	4.763	0.0418	0.0190
16002	5.850	2.850	14.0	22000	26000	9	4.763	0.0550	0.0250
16003	6.000	3.240	14.0	20000	24000	10	4.763	0.0704	0.0320
16004	6.350	3.740	15.0	18000	21000	10	5.556	0.1122	0.0510
16005	6.960	4.590	15.1	15000	18000	12	5.556	0.1298	0.0590
16006	11.240	7.380	15.2	13000	15000	12	6.350	0.2002	0.0910
16007	11.680	8.150	15.6	12000	14000	14	6.350	0.2354	0.1070
16008	12.600	9.660	16.0	10000	12000	15	6.350	0.2750	0.1250
16009	12.910	10.470	16.2	9200	11000	16	6.350	0.3762	0.1710
16010	16.090	13.150	16.4	8500	10000	16	7.144	0.3960	0.1800
16011	19.430	16.250	16.2	7700	9000	16	7.938	0.5676	0.2580
16012	19.960	17.490	16.3	7100	8500	17	7.938	0.6226	0.2830

 

Basic Bearing No.	Basic Load Ratings (lbs)		Factor	Limiting Speeds (1000 RPM)		Ball Complement		Bearing Weight (Approx.)
	Cr  KN	Cor KN	fo	Grease rpm	Oil rpm	No.	Size mm	Weight
								Ibs	kg
6700	1.01	0.56	15.7	10000	12000	11	1.588	0.0110	0.0050
6701	1.07	0.56	16.2	8300	9500	13	1.588	0.0110	0.0050
6702	1.15	0.79	16.5	6600	7600	14	1.588	0.0110	0.0050
6703	1.20	0.87	16.3	5000	6700	15	1.588	0.0154	0.0070